Seismic Design Practices for Power Systems: Evolution, Evaluation, and Needs
The evolution of seismic design practices in electric power systems is reviewed. In California this evolution had led to many installation practices that are directed at improving the...
First Experience Concerning the Seismic Behaviour of an Electric Power System in Eastern North America
The November 25, 1988, Saguenay earthquake of magnitude MbLg=6.5 occurred in the province of Quebec, Canada....
Economic Impact of Earthquake Effects on the City of Everett's Lifelines
The economic effects of lifelines failures, caused by three hypothesized earthquake scenarios, in the city of Everett, Washington are estimated. The project team consists of lifeline seismic...
Investigating Fault Rupture Hazards: An Example from the Wasatch Fault Zone, Utah
The Kern River project consists of a 36-inch diameter high-pressure natural gas pipeline, to be constructed from southwestern Wyoming to southern California. The alignment crosses several...
Evaluation of Automatic Earthquake Shutoff Valve Performance and Recommendations for Future U.S. Standards
Increasing interest of local and state government has developed in recent years regarding legislation requiring automatic shutoff valves for natural gas lines as well as lines containing...
Philosophy for Treatment of High-Pressure Natural Gas Pipelines at Active Fault Crossings
Natural gas from fields in the overthrust belt of southwest Wyoming will be collected and transported to Southern California. The proposed Kern River Pipeline will transport gas to Daggett,...
Dana Point Harbor, Orange County, California (A Shallow-Draft Marina)
Dana Point is a shallow draft harbor for 2500 permanently moored vessels. Marina Amenities include boat launching ramps, trailered boat storage, a fuel dock, and sport fishing facilities....
Performance of Liquid Storage Tanks during the 1989 Loma Prieta Earthquake
Utilities and industrial facilities in the strong shaking area of the 1989 Loma Prieta earthquake include a large inventory of tanks of all types. The earthquake induced a few incidents...
Comparison of a Practical Fragility Analysis of a Reactor Building with Non-Linear Monte Carlo Simulation
There are several conventional methods to assess seismic safety of nuclear power plants practically. In these methods, non-linear effect of the structural elements is considered with an...
A Plant for All Seasons
Collins, Eckley and Detweiler describe a successful energy conservation program at the Willow Lake Wastewater Treatment Plant, Salem, Ore. By funding the $4.59 million project with a combination...
Reciprocal Recycling
Municipalities are turning their wastes into valuable products through a unique combinations of water reuse and energy recovery. Reclaimed water, the product of the wastewater treatment...
Pipeline Explodes, Two Dead, 31 Injured, 11 Homes Destroyed
A high pressure pipeline in a suburb of San Bernardino, California exploded in a deadly fireball on May 25, 1989. Damaged as a result of a train wreck several weeks earlier, or by the...
Dry Spent Fuel Storage Compatibility at the Back End of the Fuel Cycle
The U.S. Nuclear Regulatory Commission (NRC) has publicly called for dry storage designs to be compatible with the back end of the fuel cycle, to achieve overall fuel cycle efficiency....
TN28V High Capacity Cask for the Transport and Storage of Vitrified Wastes
When the option of reprocessing has been selected, closing of the fuel cycle implies the return shipment of reprocessing wastes back to the country of origin of the spent fuel, in particular...
Experience with Certifying Borated Stainless Steel as a Shipping Cask Basket Material
The original cask designs for a cask demonstration project featured fuel baskets constructed of borated stainless steel (bss) as a structural material. The project is intended to demonstrate...
Spent Fuel Storage Requirements for Nuclear Utilities and OCRWM
Projected spent fuel generation at U.S. power reactors exceeds estimated aggregate pool storage capacity by approximately 30,000 metric tons of uranium (MTU). Based on the current repository...
Site Selection Criteria for Constructing an Independent Spent Fuel Storage Installation (ISFSI) at a Commercial Nuclear Power Plant
Commercial nuclear power plants in the U.S. are responsible for providing their own interim storage for excess spent fuel. A facility located onsite, acting as a buffer between in-pool...
Choosing AT-Reactor Spent Fuel Storage Technologies
Need for expansion of the spent fuel storage capability of reactor sites was first caused by delays in construction of reprocessing facilities, later by cessation of commercial reprocessing...
Concrete Cask Storage Technology
The paper presents the design and operation of the new dry storage system for nuclear waste. The system was designed by complete nuclear, thermal-hydraulic and structural analysis to the...
Size and Transportation Capabilities of the Existing U.S. Cask Fleet
This study investigates the current spent nuclear fuel cask fleet capability in the United States. In addition, it assesses the degree to which the current fleet would be available, as...
Return to search